Mini60s 1-60MHz HF ANT SWR Antenna Analyzer Meter with Bluetooth Android APP PC Software measuring instrument for Ham Radio Hobbists
Made of fine quality material, practical, easy to operate and use, wide application range, has a long service life.
Built-in 3.7V, 3000mAh rechargeable lithium battery.
Frequency generation and control is 1-60MHz.
Six operation buttons, easy and convenient to operate.
Installed black metal housing, just connect the power (not included) and then work.
Support measuring data waveform analysis via connecting computer with USB cable (not included).
Manual control option displays SWR and complex impedance at selected frequencies.
Automatic scanning results are displayed as frequencies of lowest SWR and complex impedance.
Battery operated for field use or use external 13.8V wall adapter.
Power saving modes.
Multi-point calibration for better accuracy.
Measure antenna electrical parameters: SWR, impedance (resistance+reactance), capacitance, inductance
Measure feed point impedance
Measure ground loss
Adjust antenna tuners and determine loss
Measure inductors and capacitors
Measure coax transmission line (SWR, length, velocity factor, approximate Q and loss, resonant frequency, and impedance)
Measure and determine optimum settings for tuning stubs: SWR, approximate Q, resonant frequency, bandwidth, impedance
Determine characteristic impedance of transmission line
Determine length of wave phasing lines
Coaxial cable loss
Determine antenna tuner loss
Measure balun loss
Measure inductor Q
Estimate quartz crystal parameters
Measure magnetic loop resonance and SWR
Battery: 1 * lithium battery, 3.7V, 3000mAh (included)
Version type: BT version
Frequency generation and control: 1-60MHz
Source impedance: 50 ohms
Stability: (+/-) 100 ppm
Spectral purity: harmonics down >- TBD dB beyond 60MHz
Step size: user configurable increments of 100Hz, 1KHz, 10KHz, and 100KHz
Usable measurement range: SWR: 1.0 to 9.99
Impedance: Approx. 5 to 2000 ohms
RF output: adjustable: 2.0 Volts pp (typ)
RF out: BNC
Powered by external: DC 12-14V, 500mA
External power: 2.1mm power jack (center pin positive)
USB interface: mini USB receptacle
Item size: 90 * 53 * 25mm / 3.5 * 2.1 * 1.0in (without protrusions)
Item weight: 238g / 8.4ounce
Package size: 153 * 103 * 40mm / 6.0 * 4.1 * 1.6in
Package weight: 287g / 10.1ounce
Note: compatible with Android 2.2-4.0 or new version; supports 3-10 inch mobile phones and tablets; supports Win via software.
1 * Mini60S Antenna Analyzer
2 * Adapter